DSX-600 CableAnalyzer
Technical Reference Handbook
134
GPU114.EPS
Figure 63. HDTDX Plot
The vertical scale shows the amplitudes of the crosstalk
signals. The numbers on the scale are for reference only and
do not have units. The values on the scale are related to the
limits for NEXT in the selected test limit. For example, a
crosstalk signal that goes to 20 on the scale when you use a
Cat 5 limit goes to over 40 when you use a Cat 6 limit.
The orange, dashed lines are at the start and end of the
cabling that the tester includes in the test results.
The horizontal scale shows the distance along the cabling.
To Next Page
Loading...
