Chapter 8: Use Projects
Tutorial: Make a New Project
153
The date range for the results in the project.
Results: A summary of the test results in the project:
: The number of tests that failed.
: The number of tests that passed.
: The number of results from tests on twisted pair cable that
have PASS* results. PASS* results have measurements within
the range of accuracy uncertainty for the tester. See “PASS*/
FAIL* Results” on page 94.
To see the results, tap the panel.
Test Setup: The tests that are necessary for each cable in the
project.
To add a test to the project, tap NEW TEST.
For information about twisted pair test settings, see Chapter 3.
Cable ID Sets: The sets of IDs the tester can use for the names of
test results.
To add a set of IDs to the project, tap NEW ID SET. See “How to
Make ID Sets” on page 165.
To use a different project, tap CHANGE PROJECT, then tap a
project.
To make a new project, tap CHANGE PROJECT, then tap NEW
PROJECT.
TRANSFER lets you export or import projects to or from a flash
drive, and delete projects on the flash drive. The project data
includes all project settings and test results.
MANAGE lets you rename, copy, or delete a project that is in the
tester:
Rename: Lets you give the project a new name. The tester
saves all the settings and test results in the project with
the new name.
To Next Page
Loading...
