Chapter 1: Get Acquainted
Connectors, Keys, and LEDs
9
: Power key
: Press to go to the home screen.
Connector for the AC adapter. The LED is red when the battery
charges, and green when the battery is fully charged. The LED is
yellow if the battery will not charge. See “Charge the Battery”
on page 16.
RJ45 connector: Lets you connect to a network for access to Fluke
Networks cloud services.
Micro-AB USB port: This USB port lets you connect the tester to a
PC so you can upload test results to the PC and install software
updates in the tester.
Type A USB port: This USB host port lets you save test results
on a USB flash drive, connect the FI-1000 video probe to the
tester, and connect a Wi-Fi adapter for access to Fluke Networks
cloud services.
Headset jack. See “How to Use the Talk Function” on page 95.
Note
If you have two main testers, you can use one as a
remote. To select the remote function, tap TOOLS
> Main as Remote.
To Next Page
Loading...
