Chapter 3: Certify Twisted Pair Cabling
Twisted Pair Autotest Results
61
The wire map agrees with the outlet configuration selected
for the test.
When more than one button shows at the bottom of the screen,
the tester highlights one in yellow to recommend which one to
tap. See “Buttons to Do Tests and Save Results” on page 36.
Figure 22. Wire Map Examples: Open Wire and Open Shield
GPU60.PNG
GPU61.PNG
Open
Wire 4 is open 36 m from the tester
and 14 m from the remote.
Open Shield
The shield is open 3.6 m from the
tester. The wire map always shows
the shield if you select a shielded
cable type (such as S/FTP) on the
TEST SETUP screen and you turn on
the Shield Test. If you select an
unshielded cable type or turn off
the Shield Test, the wire map shows
the shield only if the shield has
continuity.
To Next Page
Loading...
