Fluke II Series Getting Started Guide

1
EtherScope
TM
Series II
Network Assistant
About This Guide
This EtherScope™ Series II Network Assistant Getting Started
Guide introduces you to the features and functions of your
EtherScope™ Series II Network Assistant and provides basic
instructions for setting up and operating the instrument.
The information in this guide is designed to help you
become comfortable using your new instrument. After
reading this guide, you will find the online help system the
best source for answering questions and helping use the
product to maintain your network and troubleshoot
problems as they arise.
Introduction
EtherScope™ Series II Network Assistant (hereafter also
referred to as “the instrument” or “EtherScope Network
Assistant”) is a portable, integrated network test tool
designed to assist you with installing, monitoring, and
troubleshooting wired and/or wireless Local Area Networks
(LANs). EtherScope Network Assistant gives you instant
visibility into your network, providing crucial information
about its health and status so that you can proactively
identify and solve problems before they impact
performance.

Fluke II Series Specifications

General

True RMS	Yes
Temperature	-40 °C to 400 °C
Continuity	Yes
Diode Test	Yes
Safety Rating	CAT III 600V
Voltage DC	600V
Voltage AC	600V
Current DC	10A
Current AC	10A
Resistance	40MΩ
Battery Life	400 hours
Warranty	3 years