Fluke II Series - Adding a Graphic to Report Headers; Adding an Instrument Comment to Report Footers

Reports
51
Adding a Graphic to Report Headers
To customize your reports, you can add a graphic, such as a
company logo, to the report header. To do this, place a .gif
file named
yourCompanyLogo.gif
in the root directory on the CompactFlash memory card.
The graphic is displayed on the left side of the report header
in a 180 x 70 pixel area. Note that if you do not supply a
graphic, the Fluke Networks logo is displayed.
Note
The user-supplied graphic and Fluke Networks logo
can only be seen if the report is viewed on a PC.
Adding an Instrument Comment to Report Footers
You can add an instrument comment to your report that
appears in the footer. The comment is a simple text file that you
create using an application such as Notepad.
To add a comment, place a file named
instrumentComment.txt
in the root directory on the CompactFlash memory card.
The instrument comment is displayed at the bottom of the
report in the Instrument Comment field. Note that if you do
not provide a comment file, the footer does not display the
Instrument Comment field.