Fluke II Series - Accessing the Instrument Remotely (LAN Only)

Accessing the Instrument Remotely (LAN only)
53
Accessing the Instrument Remotely
(LAN only)
You can control EtherScope Network Assistant and view its
result screens from a remote location. The instrument
contains a Virtual Network Connection (VNC) server that is
used for remote access.
To access the remote user interface:
1 Start Internet Explorer.
Note
EtherScope Network Assistant supports Internet
Explorer only.
2 In the Address field, enter the IP address of the
EtherScope Network Assistant that you want to
connect to.
Note
The instrument’s IP address is located in the preview
pane for the Test Results screen when the
Connection test is highlighted.
The EtherScope™ Network Assistant web server home page
(Web Server Home Page) is displayed.
feb87s.bmp
Figure 11. Web Server Home Page