Fluke II Series - Page 68

EtherScope
TM
Series II
Getting Started Guide
54
From this screen, you can do the following:
• Remotely access the instrument.
Note
The remote instrument can be accessed by multiple
users, but can be controlled by only one user at a
time.
• Access reports saved on the CompactFlash memory
card or real-time reports in the instrument’s active test
results memory.
• Initiate a support incident at the Fluke Networks
website.
• Access the Help screens.
3 To remotely access the instrument:
a Click .
b Use the keyboard to type the Remote
Authentication password. Then, click .
Note
The instrument’s default factory setting requires no
password. Therefore, clicking with no entry in
the password field displays the Test Results screen.
However, for security reasons, you can set a
password to restrict usage to authorized users only.
See “Instrument Security Settings” on page 41 for
instructions.
The remote instrument’s Test Results screen is displayed.
You are now connected and can control the instrument
remotely.