Fluke II Series Getting Started Guide

EtherScope
TM
Series II
Getting Started Guide
24
Wireless LAN Interface LEDs
LINK
• Green: 802.11b link established.
• Amber: 802.11a or 802.11g link established.
• Off: no link is present.
UTILIZATION
Represents the percent bandwidth consumed on the current
channel:
• Green: 1.0 % - 30.0 %.
• Amber: 31.0 % - 60.0 %.
• Red: 61 % - 100 %.
COLLISION
Amber: indicates that a retry packet was received.
ERROR
Red: indicates an FCS error was detected in a received packet.
TRANSMIT
Green: indicates that packets are being transmitted.
Power LED
• Green (solid): instrument turned on (same for both
operating on battery and operating with AC power
adapter connected).
• Green (flashing): instrument turned off with AC power
adapter connected and charging.
• Amber: the instrument is in standby mode (see
”Conserving Battery Power” on page 16).
• Off: instrument is turned off; no AC power adapter is
connected.

Fluke II Series Specifications

General

True RMS	Yes
Temperature	-40 °C to 400 °C
Continuity	Yes
Diode Test	Yes
Safety Rating	CAT III 600V
Voltage DC	600V
Voltage AC	600V
Current DC	10A
Current AC	10A
Resistance	40MΩ
Battery Life	400 hours
Warranty	3 years