The Power Supply
15
2
From the drop-down list, select Instrument Settings.
Then, in the preview pane, tap the Options hyperlink.
The Options screen is displayed.
3
In the Current Key Code box, enter your key code.
Note
You can use a remote keyboard or tap
to access
the virtual keyboard.
4
In the EtherScope Options group, tap (to check) each
software option that you want to activate.
5
Tap .
The software options you selected are now enabled.
The Power Supply
You can operate the instrument by using the rechargeable
Lithium-Ion battery. Alternatively, you can use the supplied
AC adapter charger (with or without the battery installed).
Note
Although the instrument can run on the AC adapter
without the battery pack installed, this method is
not recommended. The battery pack provides
stability for the instrument when you are using the
stand.
Operating the Instrument on Battery Power
When the instrument is running on battery power, it is
capable of approximately four full hours of operation in
wired mode and 3.5 hours in wireless mode. The instrument
comes packaged with the battery installed. To operate on
battery power, simply turn the instrument on.
To Next Page
Loading...
Need help?
General
