Introduction
7
Registering Your Instrument
Take the time to register your instrument. The EtherScope
Resource CD contains registration information and
instructions.
You can also register the instrument by going to our website
at www.flukenetworks.com. To register:
•
If you are a registered user, click the MyAccount Sign In
link. Supply your email address and password and then
click .
•
If need to set up an account, click the Create an
Account link. Supply the required information and
then click .
As a registered user, you are entitled to entry-level product
support. This includes basic access to the online Knowledge
Base library of product operation and application
information and web-based trouble ticketing. In addition,
you will receive Fluke Networks company and product
information updates.
After registering the product, make sure that you have the
latest software installed. See “Updating the Software” on
page 10 for details.
Care and Maintenance
To obtain reliable test results, always follow proper cleaning
and maintenance procedures:
•
To prevent moisture from entering the instrument,
clean the front panel touch screen with a moist cloth
only.
•
Do not spray water directly on the front panel touch
screen. Wipe the case with a damp cloth.
•
Do not use organic solvents, acid, or alkali solutions.
To Next Page
Loading...
Need help?
General
