EtherScope
TM
Series II
Getting Started Guide
6
Please observe the following safety regulations when using
your EtherScope Network Assistant:
W* Warning Class 1 Laser Product
This product contains a Class 1 laser (EtherScope
Fiber Models). To prevent eye injury, do not look
into the laser port.
XWWarning
To avoid possible electric shock or personal
injury, follow these guidelines:
•
Do not use this product if it is damaged. Before
using the product, inspect the case. Look for
cracked or missing plastic.
•
Do not operate the product around explosive
gas, vapor, or dust.
•
Do not open the case. There are no user-
serviceable parts inside.
•
Do not connect a telephone line to this product.
•
If this product is used in a manner not specified
by the manufacturer, the protection provided by
the product may be impaired.
WCaution
•
To avoid possible damage to the instrument and
to the equipment under test, use the proper
terminals and cable for all connections.
•
Use of controls or adjustments or performance
of procedures other than those specified herein
may result in hazardous radiation exposure
(EtherScope Fiber Models).
To Next Page
Loading...
