Fluke II Series Getting Started Guide

Introduction
3
Table 1. Accessories
Item Description
EtherScope Extended Test Kit
Includes additional accessories: spare rechargeable battery, external battery charger,
external mini keyboard, wiremap adapters (#2-6), and large carrying case.
WireView™ wiremap adapter
(office locator)
Cable termination device with office locator ID #1. Used to perform the Cable Test
wiremap operation and used as an office locator.
WireView wiremap adapters Set of five wiremap adapters with office locator IDs #2 through #6.
External Keyboard USB mini keyboard.
Carrying Strap Strap clips to the instrument for easy carrying
Stylus Stylus for use with the instrument’s touch screen display.
Battery Pack Rechargeable Lithium Ion battery pack.
External Battery Charger External battery charging station.
AC adapter, power cord
Input: 90V -264V AC, 50/60Hz; Output: 15V DC, 1.3A (20W); Power Cord termination
varies by country.

Fluke II Series Specifications

General

True RMS	Yes
Temperature	-40 °C to 400 °C
Continuity	Yes
Diode Test	Yes
Safety Rating	CAT III 600V
Voltage DC	600V
Voltage AC	600V
Current DC	10A
Current AC	10A
Resistance	40MΩ
Battery Life	400 hours
Warranty	3 years