EtherScope
TM
Series II
Getting Started Guide
64
Specifications (continued)
Cable Types
•
Unshielded Twisted Pair LAN cables (100 ohm UTP
category 3, 4, 5, 5E, and 6 ISO/IEC Class C and D).
•
Foil-screened Twisted Pair cables (100 and 120 ohm
ScTP category 3, 4, 5, and 6 ISO/IEC Class C and D).
•
Identifies and operates with the optional fiber adapter,
LX (1310nm, -3 dBm (0.50 mW max)),
SX (850nm, -2 dBm (0.63 mW max)), and ZX (1550nm,
+4 dBm (2.5 mW max)).
Cable Length
•
Open or shorted with wiremap adapter: 1 to 305 m (3
ft. to 1000 ft.).
•
Terminated with ≥ 20 % reflection: 1 to 305 m (3 ft. to
1000 ft.).
Note
Length accuracy depends on the cable type selected
on the Cable Verification screen.
Receive Level
100 to 5000mVp-p
Datalink Signal
500mVp-p to 4000mVp-p
Measuring Terminated Cables
Cable Verification tests individual twisted-pairs of a cable
that are terminated into most equipment vendors’ Ethernet
ports, such as on a hub, switch or NIC.
All cable tests other than WireView wiremap and office
locator ID are operational in the presence of datalink signal.
To Next Page
Loading...
