Chapter 9: Certify Fiber Cabling
Autotest in Smart Remote Mode
267
GPU118.EPS
Figure 112. Result for Smart Remote Mode
(Unsaved Bi-directional Results Shown)
Connector icons show the number you entered for the TOTAL
CONNECTIONS setting on the No. of Connectors/Splices screen
(Figure 108 on page 257). For Figure 112, the TOTAL
CONNECTIONS setting is 4.
The round icon shows the number of splices entered for the
SPLICES setting on the No. of Connectors/Splices screen.
Bi-directional results show the fibers crossed at the main and
remote ports. The fibers show the connections as they are at the
end of the test.
To see help for the screen, tap .
To Next Page
Loading...
