FOR-A FA -10DCCRU - 8 SYSTEM Settings

46
8. SYSTEM Settings
Press and hold the GRP ADJ/SYSTEM button to enter System Setting mode.
The GRP ADJ/SYSTEM button flashes in this mode.
Pressing the flashing GRP ADJ/SYSTEM button exits System Setting mode and the button
functions as a Group ADJ On/Off.
The SELECT button allows you to select a setting. Successively pressing the button scrolls setting
items in the following order. When the end setting is reached, the display returns to the top item.
① Unity Mode: Unlinked
↓
② Front Buzzer: Enable
↓
③ GPI Buzzer: Enable
↓
④ Display Mode: Full
↓
⑤ Display BRIGHT: 30%
↓
⑥ GPI 1 No.1-10
↓
⑦ GPI 2 No.11-20
↓
⑧ GPI 3 No.21-30
↓
⑨IP: 192.168.0.101
↓
⑩ Subnet 255.255.255.0
↓
⑪ Gateway 0.0.0.0
↓
⑫ FAN: Normal
↓
⑬ Soft Ver: 2.10
↓
⑭ FPGA1 Ver: 1.00
↓
⑮ FPGA2 Ver: 1.00
↓
Unity Mode: Unlinked (Back to the top)
IMPORTANT
Note that in System Setting mode system settings can be checked and changed
without a main unit connection. Other settings cannot be performed in this mode.