FORST ST6P - Oils, Fluids and Lubricants; Table 5 - Oils, Fluids and Lubricants

Redwood Global Ltd - ST6P
Operator and Maintenance Manual
Chapter 5: Maintenance
5.17 OILS, FLUIDS AND LUBRICANTS
Table 5 - Oils, fluids and lubricants
Oils, Fluids, and Lubricants
Item Assembly Product
1
Engine oil 5w30 API SJ or higher (fully-synthetic)
2
Hydraulic oil
1
ISO 46 (VG 46)
3
Fuel Petrol
4
General greasing
2
Lithium EP1 General Purpose
5
General oil lubrication 
Please consult your engine operator’s manual for oil quantities relating to your engine
type.
1
It is advised that the oil is checked and topped up to the FILL LINE on the side of the
hydraulic tank when the machine is cold and on a level surface.
2
The greasing points can be found on the control panel. Please do not over grease, 2 x
pumps per grease nipple should be sufficient.
12-00-001 v4.0 102