FORST ST6P - Draining the Hydraulic Oil; Figure 70 - Insert Hose

5.15 DRAINING THE HYDRAULIC OIL
CAUTION
Use suitable protective gloves to avoid contact with skin.
CAUTION
Use suitable protective eye wear to protect eyes from contact with oil.
CAUTION
Use approved local authority environmental procedures when disposing of
fluids.
You may need to drain the hydraulic oil from the machine if:
l
A leak has been detected on the machine
l
The machine needs servicing
l
The machine needs maintenance
1. Stop the engine.
2. Remove the ignition key and keep in a safe place.
3. Remove the hydraulic oil filter from its housing.
4. Using a suitable tool capable of sucking oil, insert the tool into the hydraulic oil
filter housing and suck the old oil out of the tank.
Figure 70 - Insert hose
5. Dispose of the old oil safely and correctly.
Chapter 5: Maintenance
Redwood Global Ltd - ST6P
Operator and Maintenance Manual
97 12-00-001 v4.0