Redwood Global Ltd - ST6P
Operator and Maintenance Manual
Chapter 2: Safety instructions
2.1 SAFE WORKING
Before using this machine, make sure that you are trained and competent in its
operation.
l
Know the location of and how to use all the safety features.
l
Know how to control the feed and stop the machine in an emergency.
l
Be familiar with the hazards and safe working practices to prevent injury, damage
to property, and machine.
l
Also, be aware of the legal restrictions for personnel and towing with vehicles.
DANGER
NEVER operate the machine without the discharge chute attached. Doing so
could result in serious injury.
DANGER
ALWAYS load wood from the sides of the hopper and never directly behind it.
WARNING
Only suitability trained or qualified personnel must operate this machine.
l
Operators and service personnel must be above the minimum school
leaving age (MSLA).
l
Do not let anyone operate or service the machine who has not been fully
trained.
WARNING
Always wear suitable personnel protective equipment (PPE) when operating the
woodchipper machine.
Recommended PPE:
l
Chainsaw safety helmet (EN 397) with mesh visor (EN 1731)
l
Correctly rated ear defenders (EN 352)
l
Work gloves with elasticated wrist bands (EN388)
l
Steel toe cap boots (EN 345-1)
l
Close fitting heavy duty non-snag clothing. High visibility clothing (EN
471), if needed
Avoid:
l
Wearing rings, bracelets, watches or jewellery
12-00-001 v4.0 34
To Next Page
Loading...
