FORST ST6P - Page 35

WARNING
When the machine is In use, woodchip and debris are ejected with considerable
force from the chute.
l
Make sure the discharge chute directs woodchip in a safe direction to
avoid injury or property damaged
WARNING
Keep children and animals away from the working area.
WARNING
Protect breathing with a face mask if appropriate.Some plant material can give
off harmful dust and poisonous vapours.This may cause respiratory problems or
serious poisoning.Check the material to be processed before starting.
WARNING
All personnel operating or feeding material into the machine must wear heavy
duty non-snag clothing to help prevent being caught on material and drawn into
the machine.The feed mechanism of this machine uses high powered hydraulic
motors to drive sharp toothed rollers that feed material into the cutting blades.
DO NOT take risks with it.
WARNING
Never climb onto the hopper area while the engine is running. If access is
required for maintenance or to clear blockages:
l
Stop the engine
l
Remove the ignition key
WARNING
Never assist any material into the feed rollers with hands or feet.Use the
wooden paddle or further long material if necessary.
WARNING
Material can be forcibly ejected from the hopper towards the operator.Make
sure full head and face protection is worn.
WARNING
Very twisted material should be trimmed into manageable pieces.Failure to do
this can result in material extending outside the hopper, moving aggressively
side-to-side creating a hazard to the operator.
WARNING
Keep hands and feet outside the hopper. Do not attempt to force material into
the machine by hand – use a piece of wood if necessary.
Chapter 2: Safety instructions
Redwood Global Ltd - ST6P
Operator and Maintenance Manual
35 12-00-001 v4.0