FORST ST6P - General Safety

Redwood Global Ltd - ST6P
Operator and Maintenance Manual
Chapter 2: Safety instructions
2.2 GENERAL SAFETY
DO stop the machine before making any
adjustments, refuelling or cleaning.
DO make sure all moving parts in the
machine have stopped. Remove the
ignition key before starting any
maintenance or when the machine is left
unattended.
DO make sure that the machine is level,
well supported and cannot move during
use.
DO run the machine at maximum throttle.
DO conduct regular machine checks for
visual fluid leaks.
DO take regular breaks.Wearing
protective equipment can be hot and tiring
leading to a lack of concentration,
increasing the risk of having an accident.
DO keep hands, feet and clothing out of
the feed area, discharge chute and moving
parts.
DO remove any debris attached to the
wood, such as nails, wire or mesh before
commencing work.










DO NOT use machine in poor visibility or
insufficient light to see clearly.
DO NOT use or attempt to start the
machine without the discharge chute or
guards correctly and securely fitted.
DO NOT stand directly in front of the in-
feed hopper when using the machine.
Stand to one side.
DO NOT allow the following to enter the
machine as damage is likely:
BRICKS METAL
STRING GLASS
CLOTH RUBBER
PLASTIC ROOTS
STONES BEDDING
PLANTS
DO NOT stand in front of the discharge
chute.
DO NOT smoke when refuelling.Fuel is
highly flammable and explosive in certain
conditions.
DO NOT let anyone who has not received
instruction, operate the machine.
DO NOT climb on the machine at any time
except for the ride on plate fitted to
tracked machines
DO NOT handle material partially engaged
in the machine while in operation.
DO NOT touch any exposed wiring while
the machine is running.
12-00-001 v4.0 38