FORST ST6P - Autointelligence System

Redwood Global Ltd - ST6P
Operator and Maintenance Manual
Chapter 1: Machine Overview
1.6 AUTOINTELLIGENCE SYSTEM
The ST6P Woodchipper incorporates the Först Autointelligence system. This system
monitors and manages the machine's electrical system.
For example, the Autointelligence system:
l
Will stop and start the feed rollers, making sure that the cutting conditions remain
within the optimum limits. This maximises throughput while minimising jams and
blockages.
When the flywheel speed drops below the lower threshold, the Autointelligence
system stops the feed rollers. the feed rollers will stop, the flywheel speed will
increase past the middle threshold,and the feed rollers will restart and feed wood
into the machine again.
l
Will inform you when the machine requires routine maintenance or service.
WARNING
There will be times when the material is being cut, and the feed will momentarily
stop until engine speed increases.At this point, the feed rollers will start without
warning.
12-00-001 v4.0 24