3.3 Disconnecting from the tow vehicle 50
3.4 Machine lifting 51
3.5 Removing the discharge chute 52
3.6 Storage 55
3.6.1 Preparing the machine for storage 55
3.6.2 Put into storage 55
3.6.3 During storage 55
3.6.4 Take out of storage 56
Chapter 4: Operation 57
4.1 Preparation for use 58
4.2 Positioning the machine for use 59
4.3 Starting the Machine 61
4.4 Safety & function test 63
Green and orange hopper buttons 63
4.5 Feed roller speed adjustment 65
4.6 Shutting down the machine 66
4.7 Removing blockages 67
Chapter 5: Maintenance 71
5.1 Routine maintenance 72
5.2 Daily checks 73
5.3 Weekly maintenance checks 75
5.4 Engine maintenance 77
5.5 Routine cleaning 77
5.5.1 Pressure washing 77
5.6 Opening the bonnet 78
5.7 Opening the chipping chamber cover 79
5.8 Removing the panel 81
5.9 Changing the blades 83
5.10 About blade sharpening 87
5.11 Turning or replacing the main anvil 89
5.12 Adjusting the main belt tension 92
5.13 Hydraulic oil filter 94
5.14 Changing the hydraulic filter 95
5.15 Draining the Hydraulic Oil 97
5.16 Battery 98
5.16.1 First aid 98
Redwood Global Ltd - ST6P
Operator and Maintenance Manual
5 12-00-001 v4.0
To Next Page
Loading...
