Fuji Electric Faldic-a RYS-R Series - Page 14

MHT260a (Engl.)2-4
(c) Additional data for motor with providing reduction gear, gear head unit
(i) Motor with gear ratio 1/9
2) 2 to 5 [kW]
Type GYN□□□CAG-G09 202 302 402 502
Motor output [kW]2345
Actual reduction gear ratio 1/9 −
Rated 333.3 −Speed [r/min]
Max. 555.5 −
Rated torque [N • m] 50.9 −−−
Max. (breakdown) torque [N • m] 152 −−−
Direction of motor rotation (*2) CCW
Backlash (max.) (*4) [min] 30 −−−
Mass (weight) [kg] 12.2 −−−
External dimension : See (1) (e) of 3.3 External dimensions.
(ii) Motor with gear ratio 1/25 or 1/15
2) 2 to 5 [kW]
Type GYN□□□CAG-G15 202 302 402 502
Motor output [kW] 2 3 4 5
Actual reduction gear ratio 1/15 −
Rated 200 −Speed [r/min]
Max. 333.3 −
Rated torque [N • m] 77.4 −− −
Max. (breakdown) torque [N • m] 232 −− −
Direction of motor rotation (*2) CCW
Backlash (max.) (*4) [min] 30 −− −
Mass (weight) [kg] 12.2 −− −
External dimension : See (1) (f) of 3.3 External dimensions.
(*1) 15 [μm] for over the rated speed.
(*2) Direction of shaft rotation is CCW (counter-clockwise), when motor shaft rotates forward.
The direction is viewed from a point facing the drive-end of motor.
(*4) Motor with 3 [min] backlash (max.) can be supplied, on request.