5-47
MHT260a (Engl.)
If a para. No. is specified at low order 8 bits of word +14, it is readed out at the ON edge of read command (word +15, bit 0) to words +1 and +0.
Read command
（
word +15, bit 0
）
Read end
（
word +7, bit 0
）
(the previous value) (basic para.)
Basic para.
（
words +1, +0
）
When read end signal turns on, basic para. has been settled.
If a para. No. is specified at low order 8 bits of word +14, it is rewritten at the ON edge of rewrite command (word +15, bit 1) to words +9 and +8.
Rewrite command
（
word +15, bit 1
）
Rewrite end
（
word +7, bit 1
）
(the previous value) (basic para.)
Basic para.
（
words +9, +8
）
After rewrite end signal has turned on, data at words +9 and +8 may be changed.
To Next Page
Loading...
