Fuji Electric Faldic-a RYS-R Series - Page 266

10-11
MHT260a (Engl.)
(d) Encoder cable
Cable type : WSC-P06P05, P06P10 and P6P20
Application : 0.75 [kW] and below
Ｌ
For CN1 For CN2
(i) Connector
1) CN1 2) CN2 (5 or 10 [m] cable length)
Housing 53988 - 0611
Socket shell cover 58300 - 0600
mold cover 53989 - 0605
53990 - 0605
Cable clamp 53303 - 0000
Clamp screw 59832 - 0009
3) CN2 (20 [m] cable length)
Plug housing 54180 - 0611
shell cover 58299 - 0600
shell body 58300 - 0600
mold cover 54181 - 0615
54182 - 0605
Cable clamp 58303 - 0000
Clamp screw 59832 - 0009
(ii) Wire color (iii) Cable length (L) and mass
Pin No. forCN1123456
CN2123456
Wire color Red Black Orange Orange
/ White
Sky blue Sky blue
/ White
or White Black Yellow Brown Red Blue
CAUTION
Do not extend the wiring distance by connecting two or more encoder wiring cables.
A voltage drop by contact resistance of connerctor may stop the operation abruptly.
Housing 51145 - 0601
Terminal 50639 - 8091
Plug shell cover 58098 - 0600
body 58099 - 0600
Cable clamp 54017 - 0615
Clamp screw 54018 - 0605
Cable type L [mm] Mass [g]
WSC-P06 P05
5000
0
500+
300
P10
10000
0
1000+
500
P20
20000
0
2000+
1200