Fuji Electric Faldic-a RYS-R Series - Page 271

10-16
MHT260a (Engl.)
(e) Encoder
Connector kit type for motor side (CN2) : WSK-P06P-F
Application : 0.75 [kW] and below
Housing 53988 - 0611
Shell baby, clamp side 58302 - 0600
Mold cover, latch side 53989 - 0605
Mold cover 53990 - 0605
43.5
18.8
Cable clamp 58303 - 0000
Mass : 10 [g] Clamp screw 59832 - 0009
(f) Encoder
Connector kit type for motor side (CN2) : WSK-P06P-C
Application : 1 [kW] and above
Connector MS3108B20 - 29S
Cable clamp MS3057 - 12A
Mass : 150 [g]
(g) Motor power for motor without providing brake
Connector kit type : WSK-M04P (4-pin)
Application : 0.75 [kW] and below
Cap 350780 - 1
Shell body, clamp side 350570 - 1 or
350689 - 3
Mass : 10 [g]
Notch position
Rubber bush
4
37.3
70.9
81
37.3
27.4
27.7