3 Copy
130
Copy
3
Important • Ensure that the actual orientation of the original document matches the [Original Orientation]
setting on the [Layout Adjustment] screen.
Note •You cannot use the document feeder with this feature.
1 Select [Poster].
2 Select any option.
îš„ Off
No enlarged copies are made.
îš„ Output Size
Allows you to select the paper size.
îš„ Enlargement %
Refer to "When [Enlargement %] is Selected" (P.130).
îš„ Paper Supply
Displays the [Paper Supply] screen.
Select the paper tray to be used.
Note •When you use the bypass tray, select [Tray 5] on the [Paper Supply] screen.
When [Tray 5] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5] Screen" (P.94).
When [Enlargement %] is Selected
This screen allows you to specify a different ratio for the width and length.
1 Use [+] and [-] to specify the copy ratios for the
width and length.
îš„ Width - X% / Length - Y%
Allows you to specify the copy ratios for the width and length in the range from 100 to
400% in 1% increments.