122 Copying
Setting Copy Options
Set the following options for the current copy job before pressing the (Start) button to make copies.
NOTE:
• After a copy job is completed, the copy options would be kept until the screen returns to Ready (auto-reset or the (Back)
button is pressed), the (Clear All) button is pressed, or the Copy button is pressed again.
Number of Copies
Specify the number of copies from 1 to 99.
1 Place a single document facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2 Press the Copy button.
3 Enter the number of copies using the numeric keypad.
4 If necessary, customize the copy settings such as copy size, and image quality.
See also:
• "Setting Copy Options" on page 122
5 Press the (Start) button to start copying.
Color
Select a mode from color or black and white copying.
1 Place a single document facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2 Press the Copy button.
3 Press the Color Mode button to select the desired color mode.
4 If necessary, customize the copy settings such as the number of copies, copy size, and image quality.
See also:
• "Setting Copy Options" on page 122
5 Press the (Start) button to start copying.
Document Size
Specify the default document size.
1 Place a single document facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2 Press the Copy button.
3 Select Document Size, and then press the button.
To Next Page
Loading...
