184 Using the Operator Panel Menus and Keypad
• Sharpness
Purpose:
To set the default sharpness level.
Values:
• Auto Exposure
Purpose:
To suppress the background of the original to enhance text on the scanned image.
Values:
• Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
• Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
• Margin Middle
Purpose:
To specify the value of the middle margin.
Values:
• TIFF File Format
Purpose:
To specify the TIFF file format.
Values:
Sharpest Makes the scanned image sharper than the original.
Sharper
Normal* Does not make the scanned image sharper or softer than the original.
Softer Makes the scanned image softer than the original.
Softest
Off Does not suppress the background.
On* Suppresses the background of the original to enhance text on the scanned image.
2mm*/0.1 inch* Specify the value in increments of 1 mm/0.1 inch.
0 - 50mm/0.0 – 2.0 inch
2mm*/0.1 inch* Specify the value in increments of 1 mm/0.1 inch.
0 - 50mm/0.0 – 2.0 inch
0mm*/0.0 inch* Specify the value in increments of 1 mm/0.1 inch.
0 - 50mm/0.0 – 2.0 inch
TIFF V6
TTN2*
To Next Page
Loading...
