Fuji Xerox DocuPrint CM115 w - Margin Top;Bottom; Margin Left;Right

Copying 129
 Margin Top/Bottom
Specify the top and bottom margins of the copy.
1 Place a single document facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2 Press the Copy button.
3 Select Margin Top/Bottom, and then press the button.
4 Press the or button or enter the desired value using the numeric keypad, and then press the button.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
5 If necessary, customize the copy settings such as the number of copies, copy size, and image quality.
See also:
• "Setting Copy Options" on page 122
6 Press the (Start) button to start copying.
 Margin Left/Right
Specify the left and right margins of the copy.
1 Place a single document facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2 Press the Copy button.
3 Select Margin Left/Right, and then press the button.
4 Press the or button or enter the desired value using the numeric keypad, and then press the button.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
5 If necessary, customize the copy settings such as the number of copies, copy size, and image quality.
See also:
• "Setting Copy Options" on page 122
6 Press the (Start) button to start copying.
4mm*/0.2 inch* Specify the value in increments of 1 mm/0.1 inch.
0 – 50mm/0.0 – 2.0 inch
4mm*/0.2 inch* Specify the value in increments of 1 mm/0.1 inch.
0 – 50mm/0.0 – 2.0 inch