182 Using the Operator Panel Menus and Keypad
• Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
• Margin Middle
Purpose:
To specify the value of the middle margin.
Values:
• Paper Error
Purpose:
To specify whether to display a paper error when the size of print media loaded in the printer is different from the
setting specified on the operator panel.
Values:
Scan Defaults
Use the Scan Defaults menus to configure a variety of scanner features.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
• File Format
Purpose:
To specify the file format to save the scanned image.
Values:
• Color
Purpose:
To set the color mode.
Values:
4mm*/0.2 inch* Specify the value in increments of 1 mm/0.1 inch.
0 - 50mm/0.0 – 2.0 inch
0mm*/0.0 inch* Specify the value in increments of 1 mm/0.1 inch.
0 - 50mm/0.0 – 2.0 inch
Off* Does not display a paper error.
On Displays a paper error.
PDF*
Multi Page TIFF
TIFF
JPEG
Black & White Scans in black and white mode. This is available only when File Format is set
to PDF or TIFF.
Color* Scans in color mode.
To Next Page
Loading...
