164 Using the Operator Panel Menus and Keypad
Understanding the Printer Menus
This section describes menu options that can be accessed by pressing the System button on the operator panel.
NOTE:
• The access to Admin Menu and Report / List can be limited with a password by enabling the Panel Lock function. For
more information, see "Panel Lock Function" on page 188.
Report / List
Use Report / List to print various types of reports and lists.
NOTE:
• A password is required to enter the Report / List menu when Panel Lock Set is set to Enable. In this case, enter the
password you specified, and press the button.
System Settings
Purpose:
To print a list of the information such as the printer name, serial number, and print volume.
Network settings are also printed.
Panel Settings
Purpose:
To print a detailed list of all the settings on the operator panel menus.
Job History
Purpose:
To print a detailed list of the jobs that have been processed. This list contains the last 50 jobs.
Error History
Purpose:
To print a detailed list of paper jams and fatal errors.
Demo Page
Purpose:
To print a test page.
Address Book
Purpose:
To print the list of all addresses stored as Address Book information.
Meter Readings
Use Meter Readings to check the total number of printed pages.
Values:
Meter 1 Displays the total number of color prints.
Meter 2 Displays the total number of monochrome prints.
Meter 3 Always shows 0 on your printer.
Meter 4 Displays the total number of color and monochrome prints (Meter 1 + Meter 2).
To Next Page
Loading...
