Fuji Xerox DocuPrint CM115 w - Clock Settings; Alert Tone

Using the Operator Panel Menus and Keypad 171
• Job Time-Out
Purpose:
To specify the amount of time that the printer waits for data to arrive from the computer. The print job is canceled if it
times out.
Values:
• Clock Settings
Purpose:
To set the date and time, and regional time zone of the printer.
Values:
• Alert Tone
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message appears.
Values:
Off Disables the job time-out.
On 60sec* Specifies the amount of time that the printer waits for data to arrive from the
computer.
5 – 300sec
Set Date Specifies the current date.
Set Time Specifies the current time.
Date Format yy / mm / dd Specifies the date format.
mm / dd / yy
dd / mm / yy*
Time Format 12H Specifies the time format.
24H*
Time Zone Specifies the time zone.
Panel Select Tone Off* Does not emit a tone when the operator panel input is correct.
Min Emits a tone at the specified volume when the operator panel input is correct.
Middle
Max
Panel Alert Tone Off* Does not emit a tone when the operator panel input is incorrect.
Min Emits a tone at the specified volume when the operator panel input is incorrect.
Middle
Max
Auto Clear Alert Off* Does not emit a tone before the printer performs auto clear.
Min Emits a tone at the specified volume five seconds before the printer performs auto
clear.
Middle
Max
Job Tone Off Does not emit a tone when a job is complete.
Min Emits a tone at the specified volume when a job is complete.
Middle*
Max
Alert Tone Off Does not emit a tone when a problem occurs.
Min Emits a tone at the specified volume when a problem occurs.
Middle*
Max