178 Using the Operator Panel Menus and Keypad
• Software Download
Purpose:
To specify whether to allow downloading firmware updates.
Values:
• Show NetworkInfo
Purpose:
To show or hide network information on the top screen of the LCD panel.
Values:
Scan to E-Mail
Use the Scan to E-Mail menu to edit the transmission source.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
• Edit From Field
Purpose:
To enable or disable editing of the transmission source.
Values:
USB Settings
Use the USB Settings menu to change printer settings affecting a USB port.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
• Port Status
Purpose:
To change the USB settings on your printer.
Values:
Disable Disables downloading of firmware updates.
Enable* Enables downloading of firmware updates.
IP Address* Shows the IPv4 address of the printer.
Host Name Shows the host name of the printer.
Hide Information Does not show network information.
Disable Disables editing of the transmission source.
Enable* Enables editing of the transmission source.
Disable Disables the USB interface.
Enable* Enables the USB interface.
To Next Page
Loading...
