174 Using the Operator Panel Menus and Keypad
• Adjust Fusing Unit
Purpose:
To specify the optimum temperature settings for printing for the fusing unit. To lower the temperature, set negative
values. To increase, set positive values.
The default settings may not give the best output on all paper types. When the printed paper has curled, try to lower
the temperature. When the toner does not fuse on the paper properly, try to increase the temperature.
NOTE:
• The print quality changes depending on the values you select for this item.
Values:
• Auto Regi Adjust
Purpose:
To automatically start adjusting color registration.
Values:
• Adjust ColorRegi
Purpose:
To manually perform color registration adjustment.
Manual color registration adjustments are required when the printer is initially installed and after the printer is moved.
Values:
Plain 0*
-3 – 3
Bond 0*
-3 – 3
Light Card 0*
-3 – 3
LW Gloss Card 0*
-3 – 3
Labels 0*
-3 – 3
Recycled 0*
-3 – 3
Envelope 0*
-3 – 3
Off Does not automatically adjust color registration.
On* Automatically adjusts color registration.
Auto Adjust Yes Automatically corrects color registration.
No* Does not correct color registration automatically.
Color Regi Chart Prints a color registration chart. The color registration chart
prints a lattice pattern of yellow, magenta, and cyan lines. On
the chart, find the values on the right side that are next to the
line that is perfectly straight for each of the three colors. If the
value for this line is 0, color registration adjustment is not
required.
If the value for this line is any value other than 0, specify the
adjustment values under lateral adjustment and process
adjustment in Enter Number values.
To Next Page
Loading...
Need help?
General
