Fuji Xerox DocuPrint CM115 w - Color Balance R; Color Balance G; Color Balance B; Gray Balance

Using the Operator Panel Menus and Keypad 181
• Auto Exposure
Purpose:
To suppress the background of the original to enhance text on the copy.
Values:
• Color Balance R
Purpose:
To specify the default color balance level of red within the range of -2 to +2. The factory default menu setting is 0.
• Color Balance G
Purpose:
To specify the default color balance level of green within the range of -2 to +2. The factory default menu setting is 0.
• Color Balance B
Purpose:
To specify the default color balance level of blue within the range of -2 to +2. The factory default menu setting is 0.
•Gray Balance
Purpose:
To specify the default gray balance level within the range of -2 to +2. The factory default menu setting is 0.
NOTE:
• This option is effective only for black and white copying.
•N-Up
Purpose:
To print two original pages to fit into one sheet of paper.
Values:
• Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
Off Does not suppress the background.
On* Suppresses the background of the original to enhance text on the copy.
Off* Does not perform N-Up printing.
Auto Automatically reduces the original pages to fit into one sheet of paper.
Manual Prints the original pages into the one sheet of paper in the size specified in
Reduce/Enlarge.
4mm*/0.2 inch* Specify the value in increments of 1 mm/0.1 inch.
0 - 50mm/0.0 – 2.0 inch