Using the Operator Panel Menus and Keypad 191
Setting the Time for the Power Saver Mode
The printer switches to the power saver mode after the specified time.
See also:
• "Power Saver Mode" on page 27
1 Press the System button.
2 Select Admin Menu, and then press the button.
3 Select System Settings, and then press the button.
4 Select Power Saver Timer, and then press the button.
5 Select Low Power Timer or Sleep Timer, and then press the button.
6 Press the or button or enter the desired value using the numeric keypad, and then press the button.
You can select from 5 – 30 minutes for Low Power Timer or 1 – 6 minutes for Sleep Timer.
7 To return to the previous screen, press the (Back) button.