Fuji Xerox DocuPrint CM115 w User Manual

246 Maintenance
 Cleaning the Color Toner Density (CTD) Sensor
Clean the CTD sensor only when an alert for the CTD sensor is shown on the Printer Status window or LCD panel.
1 Turn off the printer and disconnect the power cord.
2 Push the rear cover handle and open the rear cover.
3 Clean the CTD sensor inside the printer with a clean dry cotton swab.
4 Close the rear cover.
5 Connect the power cord and turn on the printer.

Fuji Xerox DocuPrint CM115 w Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM115 w
Category	Printer
Language	English