Fuji Xerox DocuPrint CM115 w - Setting up the Computer

136 Scanning
• Setting Up the Computer
NOTE:
• For Windows 8, Windows Server 2012, Windows 8.1, and Windows Server 2012 R2, a computer automatically connects the
printer using Web Services on Devices (WSD). There is no need to install the printer manually.
For Windows 7 and Windows Server 2008 R2:
1 Click Start  Computer  Network.
2 Right-click the icon for the printer, and then click Install.
The printer is connected by Web Services on Devices (WSD).
For Windows Vista and Windows Server 2008:
1 Click Start  Network.
2 Right-click the icon for the printer, and then click Install.
3 Click Continue.
The printer is connected by Web Services on Devices (WSD).
Procedures for WSD (Web Services on Devices) Scan
1 Place a single document facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2 Press the Scan button.
3 Select Scan to WSD (Web Services on Devices), and then press the button.
4 Select Scan to, and then press the button.
5 Select a desired computer you want to send the scan job, and then press the button.
6 Select a desired scan event, and then press the button.
Available types:
• Scan
• ScanToPrint
• ScanToEmail
• ScanToFax
• ScanToOCR
7 Press the (Start) button.