192 Using the Operator Panel Menus and Keypad
Resetting to Factory Defaults
After executing Initialize NVM and rebooting the printer, the menu parameters or data are reset to their factory
default values.
NOTE:
• The following procedure does not initialize the network settings.
- To initialize the network settings, refer to "Initialize NVM" on page 169.
- To reset the wireless connection settings, refer to "Reset Wireless" on page 168.
1 Press the System button.
2 Select Admin Menu, and then press the button.
3 Select Maintenance, and then press the button.
4 Select Initialize NVM, and then press the button.
5 To initialize the menu parameters, select System Section, and then press the button.
To initialize the Address Book data for e-mail and server address, select User Scan Section, and then
press the button.
6 Select Yes, and then press the button.
The printer restarts automatically to apply the settings.
To Next Page
Loading...
Need help?
General
