220 Troubleshooting
Copy Quality Problems
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji Xerox local
representative office or an authorized dealer.
Problem Action
There are spots in copies taken from
the document glass.
There is debris on the document glass. When scanning, the debris creates a spot
on the image.
Clean the document glass with a lint free cloth.
See also:
• "Cleaning the Scanner" on page 242
The reverse side of the original is
showing on the copy.
On the Copy menu, enable Auto Exposure.
For information on turning Auto Exposure on and off, see "Auto Exposure" on
page 127.
Light colors are washed out or white
on the copy.
On the Copy menu, disable Auto Exposure.
For information on turning Auto Exposure on and off, see "Auto Exposure" on
page 127.
Image is too light or dark. Use the Lighten/Darken option on the Copy menu.
For information on making the image lighter or darker, see "Lighten/Darken" on
page 126.
To Next Page
Loading...
Need help?
General
