Printing Basics 91
Loading Letterhead in the Multipurpose Feeder (MPF)
Load the letterhead in the printer with the print side facing up. Make sure that the title on the letterhead enters the
printer first.
Loading Print Media in the Priority Sheet Inserter (PSI)
NOTE:
• To avoid paper jams, do not remove the PSI while printing is in progress.
• Use only laser print media. Do not use ink jet paper in this printer.
1 Open the front cover.
2 Slide the PSI forward, and then align the PSI to the marking on the MPF.
To Next Page
Loading...
