Fuji Xerox DocuPrint CM115 w - Output Paper Size

Copying 123
4 Select the desired settings, and then press the button.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
5 If necessary, customize the copy settings such as number of copies, copy size, and image quality.
See also:
• "Setting Copy Options" on page 122
6 Press the (Start) button to start copying.
 Output Paper Size
Specify the output paper size.
1 Place a single document facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2 Press the Copy button.
3 Select Output Paper Size, and then press the button.
4 Select the desired settings, and then press the button.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
A4 (210  297mm)*
A5 (148  210mm)
B5 (182  257mm)
Letter (8.5  11")
Executive (7.25  10.5")
A4 (210  297mm)*
A5 (148  210mm)
B5 (182  257mm)
Letter (8.5  11")
Folio (8.5  13")
Legal (8.5  14")
Executive (7.25  10.5")
Envelope #10 (4.19.5")
Monarch Env. (3.97.5")
Monarch Env. L (7.53.9")
DL Env. (110220mm)
DL Env. L (220110mm)
C5 Envelope (162  229mm)
Custom Size Portrait(Y)
297mm * /11.7inch *
127 - 355mm/5.0 - 14.0inch
Landscape(X) 210mm * /8.3inch *
77 - 215mm/3.0 - 8.5inch