128 Copying
N-Up
Print two original images to fit into one sheet of paper.
1 Place a single document facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2 Press the Copy button.
3 Select N-Up, and then press the button.
4 Select the desired setting, and then press the button.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
5 If necessary, customize the copy settings such as the number of copies, copy size (only for Off or Manual)
and image quality.
See also:
• "Setting Copy Options" on page 122
6 Press the (Start) button to start copying.
When N-Up is set to Auto or Manual, the display prompts you for another page. Select Yes or No, and then
press the button.
If you select Yes, select Continue or Cancel, and then press the button.
Off* Does not perform N-Up printing.
Auto Automatically reduces the original pages to fit into one sheet of paper.
Manual Prints the original pages into the one sheet of paper in the size specified in
Reduce/Enlarge.
Auto:
Automatically
reduces the pages
to fit in one page.
Manual:
Reduces the pages in the
custom size according to
the setting of the
Reduce/Enlarge menu.
To Next Page
Loading...
Need help?
General
