160 Scanning
Adjusting Scanning Options
Adjusting the Default Scan Settings
For a complete list of all of the defaults settings, see "Defaults Settings" on page 179.
Setting the Scanned Image File Type
To specify the file type of the scanned image:
1 Press the System button.
2 Select Defaults Settings, and then press the button.
3 Select Scan Defaults, and then press the button.
4 Select File Format, and then press the button.
5 Select the type, and then press the button.
Available types:
• PDF (factory default)
• Multi Page TIFF
• TIFF
• JPEG
Setting the Color Mode
You can scan an image in color or in black and white. Selecting black and white significantly reduces the file size of
the scanned images. An image scanned in color will have a larger file size than the same image scanned in black
and white.
1 Press the System button.
2 Select Defaults Settings, and then press the button.
3 Select Scan Defaults, and then press the button.
4 Select Color, and then press the button.
5 Select one of the following options, and then press the button.
• Black & White: Scans in black and white mode. This is available only when File Format is set to PDF
or TIFF.
• Color: Scans in color mode. (factory default)
To Next Page
Loading...
Need help?
General
