Copying 125
3 Select Reduce/Enlarge, and then press the button.
4 Select the desired settings, and then press the button.
• mm series
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
• inch series
NOTE:
• You can also use the numeric keypad to input the desired zoom ratio from 25% to 400%, or press the button to
increase the zoom ratio or press the button to reduce the zoom ratio in 1% interval. See the following table for specific
zoom ratios.
The methods to load print media vary depending on the size and orientation of the print media. For details, refer
to "Loading Print Media in the Multipurpose Feeder (MPF)" on page 85 or "Loading Print Media in the Priority
Sheet Inserter (PSI)" on page 91.
For print media that can be loaded, refer to "Usable Print Media" on page 82.
5 If necessary, customize the copy settings such as the number of copies, and image quality.
See also:
• "Setting Copy Options" on page 122
6 Press the (Start) button to start copying.
200%
A5->A4(141%)
A5->B5(122%)
100%*
B5->A5(81%)
A4->A5(70%)
50%
200%
Stmt->Lgl(154%)
Stmt->Ltr(129%)
100%*
Lgl->Ltr (78%)
Ldgr->Ltr(64%)
50%
Copy
Original
A5 B5 A4
A5 100% 122% 141%
B5 81% 100% 115%
A4 70% 86% 100%
To Next Page
Loading...
Need help?
General
