166 Using the Operator Panel Menus and Keypad
NOTE:
• This item is displayed only when Wi-Fi is set to On.
Manual Setup Enter Network
(SSID)
Specify a name to identify the wireless network. Up to 32 alphanumeric
characters can be entered.
Infrastructure Select to configure the wireless settings through the access point such as a
wireless router.
No Security Select to configure the wireless settings with no encryption
settings.
Mixed Mode
PSK
Select to configure the wireless settings with the Mixed
Mode PSK encryption. Mixed Mode PSK automatically
selects the encryption type from either WPA-PSK-AES or
WPA2-PSK-AES.
PassPhrase
Entry
Specify the passphrase of 8 to 63
alphanumeric (or 64 hexadecimal)
characters.
WPA2-PSK-AES Select to configure the wireless settings with the WPA2-
PSK-AES encryption.
PassPhrase
Entry
Specify the passphrase of 8 to 63
alphanumeric (or 64 hexadecimal)
characters.
WEP Select to configure the wireless settings with the WEP
encryption.
WEP Key Entry Specify the WEP key to use through the
wireless network. For 64bit keys, enter
10 hexadecimal characters. For 128bit
keys, enter 26 hexadecimal characters.
Transmit Key Select a transmit key from WEP Key 1,
WEP Key 2, WEP Key 3, and WEP Key
4.
Ad-hoc Select to configure the wireless setting without the access point such as a
wireless router.
No Security Select to configure the wireless settings with no encryption
settings.
WEP Select to configure the wireless settings with the WEP
encryption.
WEP Key Entry Specify the WEP key to use through the
wireless network. For 64bit keys, enter
10 hexadecimal characters. For 128bit
keys, enter 26 hexadecimal characters.
Transmit Key Select a transmit key from WEP Key 1,
WEP Key 2, WEP Key 3, and WEP Key
4.
To Next Page
Loading...
