234 Troubleshooting
016-985 Attached file size is larger than you defined. Press the button to clear the message. Try the
following:
• Enlarge Max E-Mail Size.
• Lower the resolution setting.
• Change the file format of the scanned image.
017-970 Memory is likely to be full. Press the button to clear the message. Try the following:
• Delete the data stored in the memory.
• Lower the resolution setting.
• Reduce the number of pages.
017-988 Press the button to clear the message. Check if the interface cable is securely connected or
your computer does not have any problem.
018-338 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local
representative office or an authorized dealer.
See also:
• "Online Services" on page 263
024-340 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local
representative office or an authorized dealer.
See also:
• "Online Services" on page 263
024-360
024-371
024-958 Load the specified paper and press the button to clear the message.
See also:
• "Loading Print Media in the Multipurpose Feeder (MPF)" on page 85
• "Loading Print Media in the Priority Sheet Inserter (PSI)" on page 91
024-963 Press the button to clear the message and load the specified paper. Follow the on-screen
instruction if one appears.
See also:
• "Loading Print Media in the Multipurpose Feeder (MPF)" on page 85
• "Loading Print Media in the Priority Sheet Inserter (PSI)" on page 91
026-720 Press the button to clear the message. Check if the USB storage device has enough memory.
026-721 Press the button to clear the message. Check if the USB storage device is write-protected or
gets any disk problem.
026-722
026-723 Press the button to clear the message. Check if the path and file name to save the data is too
long.
026-750 Press the button to clear the message. Check if the interface cable is securely connected, or
restart the application you use.
026-751 Press the button to clear the message. Check if the interface cable is securely connected.
026-752
031-521 Press the button to clear the message. Check if the access setting to the SMB server is correct
by contacting your server administrator.
031-526 Press the button to clear the message. Check if the domain name of the SMB server is correct.
Check DNS connection, or check if the name of the forwarding destination server is registered with
DNS.
031-529 Press the button to clear the message. Check if the network is properly connected and if the
password for the SMB server is correct.
031-530 Press the button to clear the message. Check if the working path setting to the SMB server is
correct.
031-533 Press the button to clear the message. Check the following:
• If the file name you specified is not used by other users.
• If file or folder that has the same name as the one you specified already exists.
• If the SMB server encounters any write-protection or disk problem.
Error Code What You Can Do