Printer Connection and Software Installation 39
• For Mac OS X
1 Connect the printer to a wireless network.
Refer to "Wireless Connection" on page 41.
2 Set the printer's IP address.
• If DHCP is available on your network, refer to "Dynamic Methods of Setting the Printer's IP Address" on
page 46.
• You can also manually set the printer's IP address by using the operator panel. Refer to "Assigning an IP
Address Manually" on page 47.
3 Install the driver software on the computer from the Software Pack CD-ROM.
Refer to "Configuring Printer and Installing Software on Mac OS X" on page 72.
To Next Page
Loading...
